DL-CC1310-B Wireless Module is a SoC Transceiver Module (UART Module) with AT command, which was developed based on Texas Instruments' CC1310F128RHBR RF chip. It combines an integrated RF Controller (Cortex®-MO) and a powerful Arm® Cortex®-M3 Processor, which is ideal to use especially for battery power IoT applications.
DL-SX1278PA is a high power 433Mhz LoRa Transceiver Module, which was developed based on Semtech's RF chip SX1278. For long-range transmission and better coverage concern, a power amplifier (PA) and a low noise amplifier (LNA) are integrated into this LoRa module, which makes its output power up to 30dBm (1W) and receiving sensitivity up to -149dBm
DL-LLCC68-S RF module has high receiving sensitivity of -129dBm@LoRa, ultra-low receiving current and dormant current, the transmit power can be configured through software, and the maximum power can reach +22dBm. Compared with traditional modulation technology, LoRa™ modulation technology has obvious advantages in anti-blocking and selection, which solves the problem of distance, anti-interference and power consumption that traditional design schemes cannot take into account at the same time.
M-SX1278S2 LoRa module with Semtech’s SX1278 chip, it is a 433Mhz LoRa Wireless Module with 3KM long range and 100mW output power.
The 868/915Mhz RFM95 Wireless Transceiver Moduless feature the LoRa long range modem that provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.
Designed base on TI-Chicon’s CC2500RGPR wireless transceiver chip, this DL-24PA-C is a compact remote wireless transceiver module. It is a high power 2.4G RF Transceiver Module, which is pin to pin with our DL-24PA (binding version base on CC2500 wafer), can be SMT directly when mass production.
M-BK2461U 2.4G RF Module is a low-power, high-bandwidth wireless UART module operating in 2.4GHz ISM band. It adopts Beken BK2461 chip and serial port design, U-UART interface and 121 multi-channels development-free, which can be widely used in daily life where wireless connection is required.
This 2.4G Wireless Transceiver Module uses SPI interface, and adopts 16MHz crystal oscillator (high precision, high temperature stability), which is really an ideal product for various IoT applications, such as Smart Grid, Smart Home, Toy Aeromodelling, Medical Equipment, Sweeper Robot, Wireless Keyboard and Mouse, Wireless Remote Control, Active RFID, NFC, Wireless Sensor Nodes for Low power Ad Hoc Networks, etc.
DL-PAN3031-S868 Chirp-IoT™ Wireless Transceiver Module has high receiving sensitivity of -129dBm, ultra-low receiving current and sleep current, the transmit power can be configured through software, with maximum power of +22dBm.
4G Magnetic Base Whip Antenna with 3M RG174 Cable and SMA Male Plug, which can be installed to a better signal receiving position through an extension cable. The specifications of the wire and connector can be flexibly selected.
High Quality Extension Cable for Antenna Connetction Use, SMA-K to IPEX (u.FL) RF Connector with 1.13mm RF Coaxial Cable (50CM)
2.4G SOC multi-channel wireless switch control module, with Co-Channel Interference optimization.
Designed base on TI-Chipcon's CC2500 wireless transceiver chip, this DL-24D8A-C is a compact remote wireless transceiver module, which is widely used in smart home, toy aeromodelling and close-range data transmission control fields.
DL-P76-4G-02 is a PCB built-in antenna available at 700-960/1710-2700MHz frequency band, which can be used for a 4G/LTE wireless module, 4G wireless communication application and other products. It has defaulted 3M sticker, with compact size (40*15mm PCB + coaxial cable of 100mm) and IPEX-1 connector, can be built into your product simply, with fast installation, strong signal, high sensitivity, long transmission range, high gain, and reliable performance.
ChirpLAN™ Gateway Suite is a series of wireless star networking products designed by DreamLNK for IoT remote communication technology. It has built-in Wireless Local Area Network (LAN), which can easily realize sub-1G and extranet transparent data transmission. The Gateway Suite includes Gateway DL-GW-P30, terminal SPI Wireless Module DL-PAN3028-S, terminal UART Wireless Module DL-P3028MPA with AT command, and demonstration USB dongle DL-DB-USB001.
This DL-P3028MPA RF module is a high-power UART Transceiver Module with PA, it was designed base on PAN3028 high-performance RF chip and built-in HC32L130 low-power MCU. It is an UART Module with AT command, which supports a maximum power output of 32dBm and a sensitivity of -140dBm; it is an effective wireless module which can provide excellent RF performance and strong anti-interference performance in the 398-510MHz frequency band.
868MHz Right Angle Rubber Rod Antenna with SMA Connetcor, 868MHz omnidirectional high gain pepper shape stubby antenna, 868Mhz LoRa Antenna for ISM and LoRaWAN Applications
SMA-KWE903 products are a kind of coaxial connector with small threaded connection which are widely used. They adopt UK standard threaded connection for high strength and good shock resistance. The central conductor and insulator of the SMA series connectors are usually captured to obtain a sufficiently low VSWR. The end of the outer conductor contacts directly to minimize the insertion loss.
This DB-RF001 Development Kit consists of a Switch Board and a Motherboard, with two hardware SPI interfaces. The switch board adapts to the common FSK Front-end Modules and LoRa RF Modules. The motherboard integrates a Cortex-M0 32bit MCU (HC32L176KATA from HDSC), and has several common interfaces such as SPI, UART and I2C, while the keys can be used to quickly evaluate the performance of the wireless RF front-end modules.
DL-CC2340-A and DL-CC2340-B BLE modules are both designed base on TI's SimpleLink™ wireless series CC2340R5 Bluetooth® Low Energy Chip, which uses a 48-MHz Cortex-M0+ kernel, integrates up to 512 KB of flash memory, 36 KB of SRAM,and has up to 26 universal I/O interfaces. Moreover, these Bluetooth Low Energy modules are equipped with a built-in 48MHz 10PPM external high-speed clock, and 32.768Khz external low-speed clock.