2.4g RF Receiving & Transmitting Module

Product Description

High-performance 2.4G Transceiver Module with TI Chip


Module introduction

Designed base on TI-Chipcon's CC2500 wireless transceiver chip, DL-24A is a compact,cost-effective, remote wireless transceiver module, which is widely used in smart home, toy aeromodelling and close-range data transmission control fields. Sensitivity up to -98dbm,maximum transfer rate up to 500Kbps, output power through register configuration range from -30dbm to +1dbm.

This wireless module integrates all radio frequency related functions, you can easily develop wireless products with stable performance and high reliability directly, which will extremely shorten the development cycle without in-depth understanding of RF circuit design. SMD and DIP interface modes are adopted, but manual welding is required due to different thermal expansion coefficient of the black glue and the binding wire inside.

The small size of the module is convenient for portable products, and it can well meet therequirements of low-power system by combining with low-power MCU.


Applications

● Transmission distance: 100m in open air (250Kbps);

● Operating frequency: 2400-2483mhz

● Operating voltage: 1.8V-3.6V

● Programmable carrier detection, digital RSSI output

● Excellent selectivity and out-of-band isolation

● Gold plate binding process, high cost performance

● Four-line SPI interface, strong versatility;


Features

● Wireless game controller

● Wireless keyboard and mouse

● Consumer electronics and toy model airplanes

● Wireless voice/audio transmission

● Data monitoring transmission

● Smart home control

● Remote control that supports radio frequency (RF) technology


Download Center

DL-24A Specification V1.0 


Technical Parameter

No Parameter

Reference Value

Min.-Typ.-Max.

Unit
1 Working frequency 2400,—,2483.5 MHz
2 Frequency interval —,100K,— Hz
3 Transmit Power -30,—,1 dBm
4

Receiving sensitivity 

—,-89,— dBm
5 Modulation GFSK,2-FSK,OOK MSK
6 Transmission rate 1.2,—,500 Kbps
7 Harmonic power -48,—,-45 dBm
8 Communication distance 80,—,100 M
9 Sensitivity at a rate of 2.4K —,-104,— dBm
10 Rate in OOK modulation mode —,,100 Kbps
11 Standby Power Consumption —,—,0.9 mA
12 Crystal Precision *3225/ 2*6 —,10, PPM


Pin Definitions


Pin No Pin’s Name Description
1 VCC Positive power supply, 1.8~3.6V
2 MOSI SPI data input, MOSI
3 SCLK SPI CLOCK signal
4 MISO SPI data output, MISO
5 CSN CSN=0 valid
6 GND Grounding, common ground with the system
7 ANT Antenna interface, the standard 50 Ω antenna


Size

High quality 2.4G RF module, 2.4GHz Wireless Module, 2.4G Receiving module, 2.4GHz RF front-end module, 2.4G RF Transceiver Module, 2.4G RF Modules Supplier from China - DreamLNK

2.4G High Performance Wireless Transceiver Module

2.4G Wireless Transceiver Module with CC2500 Chip Design

2.4G High Power RF Transceiver Module

2.4Ghz UART Wireless Transparent Transmission Module

2.4G Wireless Transceiver Module XN297L with on-board antenna