Realtek RTL8711F SoC Chip Based Wireless Module (Wi-Fi 6 + BLE5.0 Dual-band)

Product Description

Realtek RTL8711F SoC Chip Based Wireless Module (Wi-Fi 6 + BLE5.0 Dual-band)


The DL-SW711FA is a dual-band Wi-Fi 6 and Bluetooth LE 5.0 wireless SoC module powered by the Realtek RTL8711F chip (AmebaGreen2 platform). It features a dual-core Real-M300 processor running at up to 240 MHz, compatible with the Arm Cortex-M55 instruction set (Armv8.1-M). The module supports IEEE 802.11 a/b/g/n/ac/ax with 1T1R dual-band operation (2.4 GHz and 5 GHz), delivering data rates up to 114.7 Mbps. For security, it supports WPA/WPA2/WPA3 and hardware-level TrustZone isolation.


It includes 512 KB on-chip SRAM, 152 KB shared Bluetooth SRAM, and 4 MB onboard NOR Flash. The device offers a rich set of peripherals including UART, SPI, I2C, USB 2.0, SDIO, ADC, PWM, I2S, and 21 configurable GPIOs. It supports firmware flashing and debugging via SWD or UART interfaces. With an operating temperature range of -40°C to +105°C and a compact 23.15 x 17.5 x 3 mm SMD package, the DL-SW711FA is ideal for IoT, smart home, industrial automation, smart healthcare, and wearable applications.


Remark: this RF module is equipped with an IPEX-1 socket; however, it outputs signals via the PCB onboard antenna by default. If an external antenna is required (via the IPEX-1 socket), advance notice is necessary, as certain parameters must be modified during production.


Features


Chip and Memory:

· Built-in Realtek RTL8711F chip (AmebaGreen2 platform), dual-core Real-M300 processor (KM4TZ application core + KM4NS network core), compatible with the Arm Cortex-M55 instruction set (Armv8.1-M), maximum clock frequency 240 MHz

· On-chip 512 KB SRAM + 152 KB Bluetooth shared SRAM; on-chip 4 MB NOR Flash

Wi-Fi:

· Supports IEEE 802.11 a/b/g/n/ac/ax (Wi-Fi 6), 1T1R

· Dual-band 2.4 GHz (2412–2484 MHz) / 5 GHz (5180–5885 MHz), 20 MHz bandwidth, up to 114.7 Mbps with 11ax HE20 MCS9

· Supports WPA/WPA2/WPA3 security mechanisms, power-saving modes, and Wi-Fi/Bluetooth coexistence

Bluetooth:

· Bluetooth Low Energy 5.0, supports LE 1M / 2M / Coded (Long Range)

· Supports LE Data Length Extension, Link Layer Privacy, and High Power Mode (up to +20 dBm)

· Wi-Fi and Bluetooth share the same antenna, with a built-in RF coexistence mechanism

Peripherals and Interfaces:

· Supports UART/SPI/I2C/USB 2.0/SDIO/ADC/PWM/I2S/RMII/IR and other interfaces, with 21 flexibly configurable GPIOs

· Supports secondary development, with development tools provided for Linux / Windows environments

Antenna Type:

· PCB onboard antenna or IPEX-1 connector (1st Generation), shared by Wi-Fi and Bluetooth

Operating Conditions:

· Supply voltage 3.3 V ±10% (2.97–3.63 V), operating temperature -40 to +105°C


Typical application

· Smart Home                          

· Industrial IoT

· Smart Healthcare

· Smart Wearables

· Smart Retail

· Smart City

· Smart Agriculture

· Automotive Electronics

· Security & Surveillance

· Energy Management


Download Center

Datasheet of DL-SW711FA  Wireless Transceiver Module) V1.0 


Technical Parameter


Model

DL-SW711FA

Package

SMD-26

Dimensions

23.15* 17.5*3(mm)

Antenna Type

PCB onboard antenna or IPEX-1 connector

Frequency Range

2412~2484MHz & 5180~5885MHz

Operating Temperature

-40~105℃

Storage Environment

-40~ 125℃, <90% RH

Power Supply Range

Power Supply Voltage: 2.97V~3.63V, Typical Value: 3.3V, Supply Current: >500mA

Supported Interfaces

USB, SPI, UART, ADC, I2C, I2S, PWM, SDIO, LEDC, IR, RMII, and GPIO, etc.

Number of Available IOs

21 I/Os by default

Serial Port Baud Rate

115200 bps by default

Flash

On-chip 4 MByte

Recommended Operating Conditions

Symbol

Parameter

Min.

Typical

Max.

Unit

VDD

Power Supply Voltage

2.97

3.3

3.63

V

I

Power Supply Current

500

-

-

mA

DC Electrical Characteristics

Symbol

Parameter

Min.

Typical

Max.

Unit

VIH

High-Level Input Voltage (VIO=3.3V)

2


-


-

V

VIH

High-Level Input Voltage (VIO=1.8V)

0.65*VIO

-

-

V

VIL

Low-Level Input Voltage (VIO=3.3V)

-0.3

-

0.8

V

VIL

Low-Level Input Voltage (VIO=1.8V)

-0.3

-

0.35*VIO

V

VOH

High-Level Output Voltage


-

0.85*VIO

-

V

VOL

Low-Level Output Voltage


-

0.15*VIO

-

V

IIN

IO Input Leakage Current

-

-

100

nA

Product Size:

Brief Introduction: The DL-SW711FA is a dual-band Wi-Fi 6 + BLE 5.0 SoC module based on the Realtek RTL8711F chip. The RTL8711F belongs to Realtek's AmebaGreen2 platform and supports IEEE 802.11 a/b/g/n/ac/ax (Wi-Fi 6) dual-band (2.4 GHz / 5 GHz) WLAN protocols as well as Bluetooth Low Energy 5.0. The chip integrates a dual-core Real-M300 processor that is compatible with the Arm Cortex-M55 instruction set and based on the Armv8.1-M architecture, with a maximum clock frequency of 240MHz. The KM4TZ serves as the application processor, while the KM4NS serves as the network processor.


DreamLNK is a high-tech enterprise specializing in ISM band micropower wireless communication technology, providing different kinds of wireless modules and one-stop IoT solutions, including 433/868/915MHz wireless modules, 2.4G wireless Modules, FSK Transceiver Modules, LoRa Modules, Wi-Fi Modules,BLE Modules, Antennas, Remote Controls, and customized wireless RF solutions. Welcome to inquire!