DL-SX1278PA is a high power 433Mhz LoRa Transceiver Module, which was developed based on Semtech's RF chip SX1278. For long-range transmission and better coverage concern, a power amplifier (PA) and a low noise amplifier (LNA) are integrated into this LoRa module, which makes its output power up to 30dBm (1W) and receiving sensitivity up to -149dBm

DL-LLCC68-S RF module has high receiving sensitivity of -129dBm@LoRa, ultra-low receiving current and dormant current, the transmit power can be configured through software, and the maximum power can reach +22dBm. Compared with traditional modulation technology, LoRa™ modulation technology has obvious advantages in anti-blocking and selection, which solves the problem of distance, anti-interference and power consumption that traditional design schemes cannot take into account at the same time.

M-SX1278S2 LoRa module with Semtech’s SX1278 chip, it is a 433Mhz LoRa Wireless Module with 3KM long range and 100mW output power.

ChirpLAN™ Gateway Suite is a series of wireless star networking products designed by DreamLNK for IoT remote communication technology. It has built-in Wireless Local Area Network (LAN), which can easily realize sub-1G and extranet transparent data transmission. The Gateway Suite includes Gateway DL-GW-P30, terminal SPI Wireless Module DL-PAN3028-S, terminal UART Wireless Module DL-P3028MPA with AT command, and demonstration USB dongle DL-DB-USB001.

DL-PAN3028-S is a wireless module designed based on PANCHIP’s radio frequency chip PAN3028. It mainly adopts a new generation of Chirp-IoT ™ Modulation technology for ultra-long-distance spread spectrum communication. This Wireless module is compact in size, and has the characteristics of ultra-low receiving power consumption, strong anti-interference ability, and longer transmission distance than traditional modulation methods. It can be widely used in various wireless communication fields.

This DB-RF001 Development Kit consists of a Switch Board and a Motherboard, with two hardware SPI interfaces. The switch board adapts to the common FSK Front-end Modules and LoRa RF Modules. The motherboard integrates a Cortex-M0 32bit MCU (HC32L176KATA from HDSC), and has several common interfaces such as SPI, UART and I2C, while the keys can be used to quickly evaluate the performance of the wireless RF front-end modules.